Determining Depth

By using Smart Sustainable Foundations signposts can be installed from 150/ 350 or 650 mm depth, as opposed to 900 mm depth specified by MRWA for the installation of RHS posts (see below for details)

 

> View Specifications

 

Ground Sockets standard units 350 mm depth

You can reduce or extend depth of ground socket as required:

  • Sockets can be truncated at any vertical rib (the base is removed and inserted into the truncated end of socket)

  • You an extend the depth by using additional ground sockets. The base is removed from one ground socket and simply inserted into another to increase depth by 300 mm interments. 

 

 

What depth socket should I use?

Think of the ground socket as a protective shield  - it does not affect the size foundation required.

The concrete foundations must be installed deep enough to ensure they are not dislodged when the item is impacted. This will depend upon existing soil conditions, existing foundations, size of item to be installed, wind conditions, the risk of impact from vehicles and the anticipated speed of traffic. Follow local guidelines, as conditions differ from region to region 

 

As a guide: 

      • 150 mm sockets are for securing small items such as small signage on solid concrete traffic islands or footpaths, small barriers, bins, street furniture secured to solid concrete or asphalt foundations. Great for Keep Left signs on solid concrete traffic islands

      • 350 mm is standard depth used for most applications used to secure any post, bin, bollard, barrier or item of street furniture (you can secure foundation to road base or asphalt, and can bell out the concrete base to improve stability).

      • 650 mm is used for large items such as large signage, large statues, football posts and large bollards installed using stand-alone foundations secured into soil (ie: new concrete cannot be secured to existing concrete or asphalt foundation) such as school signposts that are highly vulnerable to vandalism and signposts in regions that are vulnerable to strong winds.

 

Good quality concrete can last 100 years

Good quality concrete can last up to 100 years, whereas rapid-set can be damaged upon first impact - choose wisely.

The Smart ground socket creates a protective shield between the item and the concrete foundations to make the item removable and the foundation re-usable. The quality of the concrete will determine the life of the foundation.  If you want the foundations to not be damaged, you must use good quality concrete (MP3 or greater) and the concrete footing needs to be large enough to ensure it will not be dislodged if item is impacted

 

 

New Works

For new works - simply use installation tool to position ground socket upright and pour concrete to secure. The Ground socket is installed flush with the surface and must be completely encased in concrete. You can pierce hole in socket and place rubble beneath socket, to allow drainage or entry for electrical wiring.  

 

Paved Areas

The socket is installed flush with the surface and must be completely encased in concrete (i.e: minimum 150 mm around the top of paved areas to protect surrounding paving from damage). Allow space for paving so socket finishes level with road or footpath. If there is soil beneath pavers we recommend you install a foundation beneath the pavers of at least 400 mm square to provide stability and ensure against dislodgement when an item is impacted. We do not recommend using 150 mm sockets in paved areas. 

 

Existing solid concrete foundation

The socket is installed flush with the surface and must be completely encased in concrete. Core drill hole large enough to fit the socket and fill the gap with concrete to secure socket to existing foundation.  We recommend 150 or 350 mm ground sockets (650 mm is not necessary for solid concrete footpaths or foundations) NB: We also provide a Smart surface mount option.  

Free-standing installations

Socket is installed flush with surface and must be completely encased in concrete. We recommend you install a 700 mm deep (minimum 50 mm beneath socket (suggest increasing depth if soil conditions are sandy or for bollards likely to be impacted by trucks or heavy vehicles at low speed) x 300 – 400 mm square foundation to provide stability and ensure against dislodgement when an item is impacted. If the soil is sandy we recommend a 400 mm square and you can bell out the bottom to provide added stability. 

MRWA specification drawings

By using Smart Sustainable Foundations posts and other roadside items such as bollards and grab-rails, can be installed from 150/ 350 or 650 mm depth (as opposed to 900 mm depth specified by MRWA for the installation of RHS posts)

 

 

 

SaveSave
  • PayPal